Genesis Arbitrage

Genesis Arbitrage · · 12 min read

Crypto arbitrage scanner: how to choose one and test it in practice

In short

  • A crypto arbitrage scanner finds price gaps between venues, but it does not make a trade profitable — every spread still has to be checked and costed.
  • A good scanner shows not only the spread but everything that cancels it — closed deposits or withdrawals, a different contract, a thin order book and fees.
  • Choose by testing: take five signals, verify each one by hand on the exchanges and see how many survive.

A crypto arbitrage scanner is software that continuously collects prices for the same coins from different exchanges, DEXs and blockchains and shows where a coin is cheaper and where it is more expensive. The difference between those prices is the spread, and that is what an arbitrage trader is looking for: buy where it is cheaper, sell where it is more expensive.

Catching these gaps by hand is close to impossible: there are thousands of coins, dozens of venues, and a noticeable gap can last anywhere from a few seconds to a few hours. But scanners are not all alike. One shows a "40% spread" on a coin whose withdrawals have been closed for a week; another flags straight away that the trade cannot be executed. Below: what to look for, how to test a scanner yourself and which promises should put you on guard. If the topic is new to you, start with What is crypto arbitrage.

What a crypto arbitrage scanner does and does not do

A scanner saves your scarcest resource — search time. The decision and responsibility for the trade stay with you.

A scanner doesA scanner does not
Puts one coin's prices from different venues into a single rowBuy or sell for you
Calculates the spread between venues as a percentageKnow your trade size, fee tier or transfer speed
Shows deposit and withdrawal status, contract address, order bookAnswer for an exchange closing withdrawals a minute later
Filters out noise and sends alertsTurn a spread into profit: you subtract fees and slippage yourself

Coverage: exchanges, DEXs and networks

The more venues a scanner watches, the more gaps it finds. Large, liquid exchanges usually trade close to each other; noticeable gaps appear more often where there are fewer participants — smaller exchanges, DEXs and between blockchains.

Check three things:

Data freshness: last trade vs the order book

A scanner can compare prices in two ways, and the difference matters.

The last price is a trade that has already happened. It could have been a tiny trade a minute ago and say little about the price you will actually get.

Order book prices are the orders resting right now. A market buy fills at the best ask and above, a market sell at the best bid and below. So the real spread is the gap between the ask on the buy exchange and the bid on the sell exchange.

What to check:

Deposit and withdrawal status and contract checks

The most common false spread is a coin that cannot be moved. Exchanges temporarily close deposits and withdrawals during network upgrades or wallet maintenance, while trading on the exchange carries on. Prices on that venue drift on their own, the spread looks large, and it cannot be executed.

A good scanner shows deposit (D) and withdrawal (W) status for each side and lets you filter: the buy exchange needs open withdrawals, the sell exchange needs open deposits.

The second trap is one ticker shared by different tokens. Two exchanges can list different coins under the same name: old and new versions after a migration, a wrapped token or a simple namesake. The spread between them means nothing. The scanner should show the contract address, and you should match it against the deposit and withdrawal pages on both exchanges. How to check the token itself is covered in How to check a token before buying.

Order book depth and order-based spread

A spread at the best prices says nothing about how much you can buy at that price. If the best level holds an order for $50 and you are trading $1,000, a market order will "walk the book" and your average price will be worse.

So look for a scanner that shows:

If the order-based spread is much smaller than the regular one, liquidity is thin and the gap will vanish the moment you trade. More on liquidity and reading the book in the lesson Spread, depth and volume.

Fees and funding

A scanner sees prices, not your account. From the spread you subtract:

Trades with perpetual futures add funding. Many exchanges settle it every 8 hours, but some contracts settle every 4 hours or every hour, and the interval depends on the exchange and the contract. A funding scanner should show not only the rate but also the interval, the next payment time and a spread normalised to one period — otherwise rates from different exchanges cannot be compared. What the rate says about the market is covered in Funding rate as a market signal.

Filters, alerts and API

Without filters a table becomes a wall of numbers. The minimum set: spread threshold, buy and sell exchanges, deposit and withdrawal status, minimum trading volume. For DEXs, add pool liquidity and network.

Alerts matter because a good trade rarely waits for you to open the tab. Usually that means a browser sound while you are at the screen and Telegram messages when you are away. It helps when alerts use the same filters as the table and limit repeats, so one coin does not ping you every minute.

An API is for those who want to build their own bot or dashboard. Check which data is available, with what delay, how many requests are allowed and what the response format looks like.

Free mode and paid plans

A free crypto arbitrage scanner is a perfectly good way to start: learn the columns, see how often opportunities appear and verify data by hand. Free modes are usually limited: fewer exchanges, no order book data, some filters or alerts missing.

A paid plan makes sense once you know exactly which data you need. Compare the contents, not the price: how many exchanges, whether there is order book depth and order-based spread, which alerts, whether there is an API. A plan unlocks data, not profit — and that is true of any service.

False spreads: where they come from

Big numbers in the table more often signal a problem than an opportunity. Typical causes:

CauseWhat it looks likeHow to filter it out
Deposits or withdrawals closedThe spread stays open for hoursD/W status, the coin's page on the exchange
Different tokens, same tickerA huge spread on a major coinCompare contract addresses
Empty order bookThere is a last price but almost no ordersAsk/bid, depth, order-based spread
Stale priceNo trades for a long timeUpdate time, trading volume
Trap token on a DEXYou can buy but not sellCheck for a honeypot
First minutes of a listingPrice jumps, deposits not open yetStatus checks and caution, see the article on listings

Checklist: how to choose a crypto arbitrage scanner

CriterionWhat to checkWhy it matters
CoverageExchanges, DEXs, networks, trade typesWider coverage, more finds
FreshnessAsk and bid, update timeA stale price is a spread that does not exist
D/W statusShown and filterableOtherwise the coin cannot be moved
ContractToken address in the rowWeeds out namesakes
Order bookDepth and order-based spreadShows whether orders cover your size
FeesCalculator or fee dataThe spread has to cover costs
FundingRate, interval, payment timeRates cannot be compared without the interval
FiltersSpread, exchanges, volume, liquidityRemove noise
AlertsSound, Telegram, repeat limitsOpportunities do not wait
APIData, delay, limitsFor your own bots and dashboards
Free modeWhat you can see without payingTest before you buy
HonestyNo income promisesA sign of a serious service

How to test a scanner in practice: five signals

The best way to choose is not to read descriptions but to test the output. It takes about an hour.

  1. Take five signals

    Write down five trades from the table or alerts: coin, exchanges, spread and time. Pick a mix — small spreads and large ones.

  2. Compare prices

    Open both exchanges and compare the ask on the buy side and the bid on the sell side with what the scanner showed. Note how many seconds or minutes have passed.

  3. Check deposits, withdrawals and the contract

    On the withdrawal and deposit pages, confirm the operations are open on the right network and the contract address matches on both exchanges.

  4. Assess the order book

    See how much of the coin sits near the best price and whether the orders cover your trade size.

  5. Work out the result

    Subtract trading and withdrawal fees, gas and slippage. The spread calculator makes this easy. Note how many of the five signals come out positive on paper.

If most signals fail for reasons the scanner could have shown itself — closed withdrawals, a different contract, a stale price — the scanner is not for you. If signals drop out only because of your own conditions, such as trade size or fees, the scanner is doing its job.

Red flags

Other signs it is time to leave:

Before your first transfer between exchanges, read about address poisoning: that scheme targets exactly the people who copy addresses often.

How to read the columns is explained in How to read the Spot – Spot table, shared table features in How to use spread tables, and plan contents in Lite and Pro plans. Alert setup is covered in the guides to Telegram alerts and sound alerts, and data for your own software in the Genesis API quick start.

Questions and answers

Is there a free crypto arbitrage scanner?

Yes, many services have a free mode. It usually shows some of the exchanges and leaves out order book depth or some alerts. That is enough to get familiar with the tool and verify signals by hand.

Why does the scanner show a big spread I cannot profit from?

Most often withdrawals are closed on the buy exchange or deposits on the sell exchange, different tokens trade under one ticker, or the order book is nearly empty. Check deposit and withdrawal status, the contract address and the ask and bid on both exchanges.

What is the difference between a last-price spread and an order book spread?

The last price is a trade that already happened. An order book spread is calculated from orders resting right now, so it is closer to the result of your own trade. If it is much smaller than the last-price spread, liquidity is thin.

Do I need to give the scanner access to my exchange account?

Not for finding trades: a scanner works with exchanges' market data. If a service asks for an API key with withdrawal rights or for funds "under management", that is a reason to walk away.

How much money do I need to start?

You can learn a scanner for free. Trade size depends on the fees of the exchanges you use: a fixed withdrawal fee hits small trades harder. Run the numbers in a calculator before any transfer and start with an amount you are prepared to lose.