How to check a token before buying: a step-by-step contract and pool check
In short
- First make sure it is the right token: match the contract address, not the ticker or logo, which anyone can copy.
- The main traps live in the contract: blocked selling, a high tax and owner powers to change the rules after you buy.
- Check the pool separately: how much liquidity it holds, whether that liquidity is locked and whether a few wallets hold most of the supply.
Checking a token before you buy means answering six questions in 10–15 minutes: is this the right contract, can the token be sold, what tax does each trade carry, what can the owner change, who holds the supply and is the pool's liquidity locked. If even one answer looks bad, it is better to hold off.
On decentralized exchanges anyone can launch a token in a few minutes. There is no listing review: a liquidity pool is created with a single transaction. So the whole check falls on the buyer, and it has to happen before the trade, not after.
Six risks to check before you buy
| Risk | What happens | Where to look |
|---|---|---|
| Copycat token | You buy a clone with the same ticker, name and logo | Contract address on the project's site, CoinGecko or CoinMarketCap |
| Honeypot | You can buy but cannot sell | Buy-and-sell simulators, the pool's trade history |
| Trade tax | The contract takes a cut of every buy or sell | Token scanners, the DEX's token-fee warning |
| Owner privileges | The owner can mint tokens, pause trading or raise the tax | Contract code on the block explorer, the read functions tab |
| Holder concentration | A few wallets can crash the price with one sale | The Holders tab on the block explorer |
| Liquidity | The pool is small or the creator can pull it | The pool page on DexScreener or DexTools, LP token holders |
The order is deliberate. The first item catches the most common mistake, the next three are about the contract, and the last two are about the market around the token.
Is it the right token: copycats with the same ticker
Tickers and names are not unique. Anyone can launch a token with a popular project's name, the same logo and the same number of decimals. In a DEX search these clones appear next to the original and sometimes above it.
The only reliable way to tell them apart is the contract address:
- take the address from the project's official website or verified account, not from a chat or a reply under a post;
- check it against the coin's page on CoinGecko or CoinMarketCap, which list the address for each network;
- compare the full address, not just the first and last characters: scammers generate addresses that match at the edges.
Do not copy an address from your own transaction history. Scammers can plant a look-alike there, as explained in our article on address poisoning.
Honeypot: can you sell the token
A honeypot token is a trap where buys go through and sells are blocked. The block is written into the contract: only addresses on the owner's list can sell, or selling requires a condition nobody can meet. Meanwhile the chart shows nothing but green candles, which draws in new buyers.
How to spot one:
- Trade history. The pool shows almost only buys, and the few sells come from a handful of addresses, most likely the creator.
- Simulation. Services such as Honeypot.is, Token Sniffer or GoPlus simulate a buy and a sell and show whether the sale goes through and what tax is taken.
- Test trade. Buy and immediately sell a minimal amount. You risk only that amount and gas, and you see the real result.
None of these gives full certainty. A contract can allow selling for the first few hours and then the owner switches the block on. That is why a honeypot check always goes together with a check of owner privileges.
Buy and sell tax
Many tokens charge a tax inside the contract: part of every trade goes to the team's address, to the pool or gets burned. These are called fee-on-transfer tokens. The buy tax and the sell tax can differ, and honest projects usually keep it low and state it in their documentation.
The tax is easy to miss because the DEX interface does not always show it upfront. A telltale sign is a swap that fails until you raise the allowed slippage above the tax rate. If a swap only goes through with slippage in the tens of percent, you are almost certainly looking at a high tax or a trap.
A hypothetical example. The buy tax is 5% and the sell tax is 10%. You buy $1,000 worth and receive tokens worth about $950. If the price does not move and you sell right away, you are left with about $855 before gas and slippage. That is a loss of almost 15% with an unchanged price.
Owner privileges: who can change the rules
A contract owner sometimes has powers that hit holders directly. Here is what to look for in the code and in scanner reports:
- Minting new tokens. The owner prints coins and sells them into the pool, and the price drops.
- Pausing trading. Transfers can be stopped for everyone or for specific addresses.
- Blacklist. A given address is barred from selling or transferring the token.
- Changing tax and limits. The tax, the maximum trade size or the maximum wallet size change with one transaction.
- Upgradeable contract (proxy). The token's logic can be replaced entirely without changing its address.
You read the code on a block explorer such as Etherscan or BscScan. A good sign is published and verified source code. A bad sign is unpublished code: then nobody knows what the contract can do.
Renounced ownership is often presented as proof of honesty, but it is only one signal. If the contract is upgradeable, a separate proxy admin may still control it. There is also fake renouncement: the owner is formally the zero address, while a hidden function keeps control with the creator.
Holder concentration: who holds the supply
Open the Holders tab on the block explorer. When reading the list, separate technical addresses from regular ones:
- the liquidity pool address is not a whale, it holds the tokens being traded;
- a burn address like 0x…dEaD means those tokens are out of circulation;
- locker contracts and exchange wallets follow their own logic.
Then look at how much the largest regular addresses hold. If, say, five wallets hold 40% of the supply, any of them can sell into the pool and crash the price. Be especially wary of addresses that received tokens right at launch and are linked to the creator.
Liquidity and liquidity locks
A pool's liquidity is the money you will be able to sell the token for. In a small pool even a modest sale moves the price by tens of percent. For example, a $20K pool and a $2M pool carry very different risks even when the chart shows the same price.
The second part of the check is who can take that liquidity away. Whoever creates the pool receives LP tokens, a share of the pool. If those sit in the creator's wallet, they can withdraw all the liquidity at any moment and the token becomes unsellable. That is the classic rug pull.
| LP token status | What it means |
|---|---|
| In the creator's wallet | Liquidity can be withdrawn at any time |
| Locked in a locker contract | Cannot be withdrawn until the unlock date; check the term and the share |
| Burned (sent to a burn address) | Can never be withdrawn |
You check the lock through the LP token's holders: they show what share sits in a locker contract or a burn address. Look at three things: what share is locked, until when and in which contract. A one-week lock or a lock on a quarter of the liquidity means very little. And a "locker" written by the team itself may have its own loophole.
A lock only protects against liquidity being pulled. It does nothing against minting, blocked selling or large holders dumping.
Step-by-step contract and pool check
Take the address from an official source
The project's website, verified account, CoinGecko or CoinMarketCap. Compare the full address and check the network.
Run the address through a scanner
Honeypot.is, Token Sniffer, GoPlus or a similar tool will show whether selling works, the buy and sell tax and any dangerous owner functions.
Open the contract on a block explorer
Is the code published, who is the owner, is there minting, pausing, a blacklist, an adjustable tax or a proxy.
Check the holders
Remove the pool, burn address and lockers from the list. Estimate the share held by the largest regular addresses.
Check the pool
Liquidity size, pool age and trade history on DexScreener or DexTools. Find the LP token holders: is liquidity locked, for how long and what share.
Make a test trade
Buy and sell a minimal amount from a separate hot wallet. Compare what you received with the no-tax estimate.
No scanner catches everything, and new schemes appear faster than new checks. If different services disagree, trust the worst result and check by hand.
Token checks in arbitrage
In DEX arbitrage, traps often look like a gift: the DEX price is far below the exchange price and the spread is tens of percent. But a copycat may be trading on the DEX under the same ticker, and the "cheap" token may be a honeypot or carry a tax that eats the whole spread.
So a large spread on a little-known token is a reason to check the contract, not a signal to trade. Compare prices only for the same contract address, subtract the token tax, gas and slippage, and remember that a spread is not yet a profit. The basics are covered in the lesson What is DEX arbitrage.
How to read the columns and warnings is covered in the guides to DEX – Futures and DEX – Spot. And so that a token check does not end with a drained wallet, read our article on wallet drainers: use a separate hot wallet for trades in new tokens.
Questions and answers
Can you sell a honeypot token?
As a rule, no: the contract itself blocks selling, and blockchain transactions are irreversible. Sometimes the owner allows specific addresses to sell, but an ordinary buyer is not among them.
If liquidity is locked, is the token safe?
No. A lock only stops liquidity from being pulled out of the pool. The owner can still mint new tokens, raise the tax or block selling, and large holders can still sell into the pool. Check every item, not just one.
What token tax is considered normal?
There is no universal rule. Many tokens have no tax at all, which is the best case for trading. Any tax has to be subtracted from your expected result twice, on the buy and on the sell, and a tax the owner can change is dangerous at any current level.
Can you rely on token scanners alone?
A scanner is a fast first filter, not a final answer. It can miss a new scheme or a hidden function. Combine it with a look at the contract, the holders and the pool, and finish with a test trade for a minimal amount.