New Coin Listings: Price in the First Minutes and Hours, Spreads and Traps
In short
- In the first minutes after a listing, a few large orders in a thin order book set the price, so sharp candles in both directions are normal, not a signal.
- Price gaps between exchanges can be huge on listing day, but often you cannot capture them — withdrawals are closed, the book is empty, or one ticker hides different tokens.
- Before buying, check the contract address, deposit and withdrawal status and order book depth, and do not chase a candle that has already run.
A listing is the start of trading for a coin on an exchange. In the first minutes, the price is set by a handful of orders in an almost empty order book, so it can multiply in seconds and fall just as fast. Prices across exchanges diverge at this stage: each venue has its own book, its own buyers and its own deposit and withdrawal rules.
Below we walk through how a listing usually unfolds, where cross-exchange spreads come from, why most of them cannot be arbitraged, and how to avoid buying a fake token or the top of a pump.
What happens to the price in the first minutes and hours
Before trading opens, the coin has no price on the exchange. The first trades are price discovery: buyers and sellers find out what they are willing to pay. While orders are few, every large buy or sell moves the chart noticeably.
| Stage | What usually happens | What to watch |
|---|---|---|
| Before trading | The exchange opens deposits, sometimes in advance. Token holders move coins in to sell them | How many coins have been deposited and whether withdrawals are open |
| First minutes | Sharp candles both ways, a wide spread between the best bid and ask | Order book depth, not the last traded price |
| First hours | Early buyers and airdrop recipients take profit, other exchanges join in | Whether the move matches across venues |
| First days | Volume drops, the price looks for a steadier level | Whether volume holds and withdrawals are open everywhere |
This is a typical picture, not a rule. Sometimes the price climbs for days, sometimes it falls from the first minute and never recovers.
Major exchanges warn about the extra risk themselves. Since 2023, for example, Binance has marked some new coins with a Seed Tag — a sign that the token may be more volatile than others. To trade such coins, users have to pass a short risk quiz every 90 days.
Why prices differ across exchanges
Each exchange has its own order book. Arbitrage traders keep prices in line: they buy where it is cheaper and sell where it is more expensive. On listing day this mechanism works poorly, and here is why.
- Different start times. One exchange opens trading an hour or a day before another. While the coin trades in one place, only local buyers set the price there.
- Closed transfers. If withdrawals are not open yet, you cannot move the coin to the exchange where it is more expensive. The gap stays, and nobody can close it.
- Different buyers. Regional exchanges have their own demand and their own limits on moving money. On Korean exchanges, for example, a new coin sometimes trades above the global price while local demand is strong and the gap cannot be closed quickly.
- Different pairs and networks. A coin may trade against USDT, a local currency or another crypto, and be withdrawn on different networks. Each extra conversion and network adds fees and time.
Market makers and a thin order book
A market maker is a firm that constantly places buy and sell orders and earns on the difference between them. Projects usually hire one so the coin has a working order book from the first minutes. Without a market maker, a listing would have even more empty levels and random spikes.
But a market maker is not a price guardian. Its orders can be pulled at any moment, and its agreement with the project is not always public. In March 2025, Binance said it had offboarded the market maker for the MOVE token: right after the December 2024 listing, it sold about 66 million tokens while placing almost no buy orders. The exchange froze the proceeds, and the project announced a token buyback.
How a thin order book moves the price
Say the sell side of the book has three levels (the numbers are illustrative):
| Price | How much you can buy at this level |
|---|---|
| $1.00 | $2,000 worth |
| $1.05 | $3,000 worth |
| $1.15 | $5,000 worth |
A $10,000 market buy eats all three levels. The average price comes out around $1.086 — almost 9% above the first level — and the last trade prints 15% higher. On the chart this looks like a 15% rally, even though one person bought. The gap between the expected and the actual price is slippage.
Deposits and withdrawals: why a spread exists but cannot be captured
To profit from a price gap between exchanges, you have to buy the coin on one exchange, transfer it and sell it on another. On listing day this path is often blocked.
Binance listing announcements often follow this pattern: deposits open about an hour before trading starts, and withdrawals open later, sometimes the next day. The exchange states the withdrawal time as an estimate. While withdrawals are closed, the coin you bought cannot be moved, and the spread on the screen is just a number.
| Reason | What it looks like | How to check |
|---|---|---|
| Withdrawals closed on the buy exchange | The coin is cheaper, but you cannot move it | Withdrawal status on the coin page and in the exchange announcement |
| Deposits closed on the sell exchange | The price is high, but you cannot deposit the coin | Deposit status on the sell exchange |
| Different networks | Withdrawal on one network, deposit on another | Network lists on the withdrawal and deposit pages |
| Empty order book | High price, but almost no buy orders | Size of the best bids and asks |
| Different tokens | Same ticker, different contracts | Contract address on both exchanges |
Even when everything is open, the transfer takes time. During those minutes, a listing price can move more than the whole spread.
How to check a listing spread
Match the contract
Find the contract address on the withdrawal and deposit pages of both exchanges. If the addresses differ, these are different tokens and there is no spread.
Check deposits and withdrawals
Withdrawals must be open on the buy exchange and deposits on the sell exchange, on the same network.
Gauge the order book
See how much size the best orders on both sides hold. If the sell side shows orders worth a hundred dollars, a large amount will not fill at that price.
Count the fees
Subtract trading, withdrawal and network fees and allow for slippage. The spread calculator helps with this.
Account for time
Estimate how long the transfer takes and what happens if the prices converge in the meantime. If the answer is a loss, skip the trade.
The columns and filters are covered in the Spot â Spot guide, and how to read spread, depth and volume is explained in the lesson Spread, depth, volume — how to read the table.
How not to buy the top of a pump
The most common listing mistake is buying after a candle has already multiplied. The buyer sees the rally and fears missing out, while the sellers are those who got the coins earlier: early investors, the team, airdrop recipients.
- Do not enter in the first minutes without a plan. Set a price above which you will not buy and an amount you are prepared to lose.
- Compare exchanges. If the coin jumped on one exchange while others stand still, the move is isolated and often reverses fast.
- Watch the selling. Long upper wicks and a wall of sell orders show that many holders want out at the top.
- Find out who can sell. Many tokens have part of their supply locked and released on a schedule. Projects publish their unlock dates themselves.
- Do not trust chat signals. "The coin will moon at listing" is a popular bait for people who will buy from the signal's authors.
The CEX Pumps - Dumps table makes it easy to track such moves across many exchanges at once: it shows price changes over intervals from 5 seconds to 1 hour. How to use it is described in the guide, and the logic of pumps is covered in the lesson CEX Pumps — tracking price spikes.
Fake tokens with the same ticker
A ticker is not unique. Anyone can issue a token with the name and ticker of a well-known coin in a few minutes and create a pool for it on a DEX. Only the contract address is unique.
An example: on January 17, 2025, the official TRUMP memecoin launched on Solana. Within the first hours and days, dozens of copies appeared with the same ticker and the word "Official" in the name. Some turned out to be traps that could not be sold, and in others the creators pulled the liquidity from the pool.
Fakes are especially dangerous around a listing. The news about the coin is already out, not everyone knows the contract, and a DEX search shows dozens of pools under one ticker. On top of that, different centralized exchanges sometimes list different tokens under the same ticker, and then the spread between them means nothing.
- Take the contract address only from the project's official sources and the exchange announcement.
- Compare the full address, not just the first and last characters.
- Before buying on a DEX, check that the token can be sold: there is a separate scam for that — the honeypot token.
- Do not open sites from links in comments and direct messages: the scheme where a single signature empties your wallet is covered in the article Wallet drainers.
Questions and answers
Why does a coin rise at listing and then fall?
In the first minutes there are few orders in the book, and a few large buys push the price up. Then those who got the coins earlier start selling: early investors and airdrop recipients. But this is not a rule — some coins rise, and some fall from the first minute.
Can you profit from price gaps between exchanges on listing day?
Sometimes, but most spreads that day are out of reach: withdrawals on the buy exchange are still closed, deposits on the sell exchange are not open, or the order book is empty. Before trading, check the contract, transfer status, network, book depth and fees.
How do you tell a real token from a fake with the same ticker?
Only by the contract address. Take it from the project's official website or the exchange announcement and compare it in full. A fake can copy the name, logo and ticker of the original.
Why does Binance mark new coins with a Seed Tag?
The tag warns that the token may be more volatile and riskier than most coins on the exchange. To trade such tokens, users have to pass a risk quiz every 90 days.