Cross-exchange crypto arbitrage: a step-by-step guide to spot pairs
In short
- Cross-exchange crypto arbitrage means buying a coin where it is cheaper and selling it where it is more expensive, either by moving the coin or with balances already sitting on both exchanges.
- The spread on screen is not yet a profit. Before a trade, check deposit and withdrawal status, network and contract, order book depth and every fee.
- The main risk of the transfer setup is the price moving while the coin travels between exchanges. A fast network, a smaller size or a futures hedge reduce it.
Cross-exchange crypto arbitrage is buying a coin on the exchange where it is cheaper and selling the same coin on the exchange where it is more expensive. What you keep is the price difference (the spread) minus trading fees, withdrawal fees and slippage. Most of the time this means spot arbitrage between exchanges: you buy the coin itself, with no leverage and no contracts.
Prices differ because every exchange is a separate market with its own order book, buyers and sellers. But between seeing a spread and capturing it sit transfers, fees and time. Below are the two working setups, a step-by-step way to find a pair, the checks you cannot skip and a worked example. If you are new to the topic, start with What is crypto arbitrage.
Two setups for cross-exchange arbitrage
Moving the coin between exchanges
You buy the coin on exchange A, withdraw it to exchange B and sell it there. The setup is easy to follow and does not need money on two exchanges at once. It has two weak spots: the transfer takes time, and the exchange charges a withdrawal fee, usually a fixed amount of the coin.
Balances already on both exchanges
You keep a stablecoin on exchange A and the coin on exchange B in advance. When a spread appears, you buy on A and sell on B at almost the same moment. There is no transfer during the trade, so the price has no time to move away. You pay for it in other ways: your capital is split between exchanges, the coin on exchange B stays in your portfolio and moves with the market, and after a few trades the balances need rebalancing, covered in the lesson Strategies and risk management.
| With a transfer | With balances on both exchanges | |
|---|---|---|
| Capital | On one exchange | Split between exchanges |
| Trade speed | Minutes or hours for the transfer | Two trades at almost the same time |
| Price risk | While the coin is in transit | The coin is held all the time |
| Withdrawal fee | On every trade | When rebalancing |
| Deposit and withdrawal status | Needed at trade time | Needed when rebalancing |
Cross-exchange arbitrage step by step: finding a pair in Spot – Spot
Comparing prices by hand across dozens of exchanges is slow: by the time you have checked the tabs, the spread is gone. Scanners collect prices from many exchanges at once, and the article Crypto arbitrage scanner explains how they work. Here is how to work with the Spot – Spot table.
Keep only transferable coins
Turn on the W filter (open withdrawals) on the buy side and the D filter (open deposits) on the sell side. For the transfer setup this is the first condition: without it the coin cannot be moved.
Pick your exchanges
In the Buy and Sell filters, keep the exchanges where you have accounts and have passed identity checks. A pair on an exchange you cannot trade on is of no use.
Set spread and volume thresholds
In the ≥ % field, enter a spread that covers your fees with room to spare. In the ≥ V field, set a minimum trading volume to filter out coins that barely trade.
Switch the mode
In By coin mode each coin takes one row with its best pair, and the badge with a number opens the other options. In All pairs mode every exchange pair is a separate row.
Compare Ask and Bid
You buy at the Ask on the buying exchange and sell at the Bid on the selling exchange. If there is almost no gap between them, the spread exists only in the last-price column.
Check the contract and the book
Compare the address in the Contract column with the addresses on the withdrawal and deposit pages of both exchanges. On a paid plan, look at Book and Ord. to see whether there are enough orders for your size.
Checks before every trade
Deposit and withdrawal status
Exchanges temporarily close deposits and withdrawals of a coin, for example during a network upgrade or wallet maintenance. Trading often continues, and the price on that exchange drifts away from the rest of the market. That is where many "big" spreads come from: you can see them, but you cannot move the coin. Check the status right before withdrawing, on both exchanges. Whether the exchange actually holds the coin in its wallet is shown in Exchange Balances: if the balance is below your size, the withdrawal may be delayed.
Network and contract address
The same ticker does not mean the same token. Different projects, an old and a new contract after a migration, or one token on different networks can all trade under one name on different exchanges. So compare the contract address on exchange A's withdrawal page with the one on exchange B's deposit page.
The network must match on both exchanges. A deposit on a network the exchange does not support is not credited automatically. Some exchanges recover such funds manually and for a fee, others refuse. For coins that need a memo or tag (XRP, for example), a deposit without the tag reaches the exchange but does not land in your account until you contact support.
Order book depth
The spread is calculated from the best prices, while a larger order fills through several levels of the book. The thinner the book, the worse your average price: above the Ask when buying, below the Bid when selling. This is most visible on new coins; see New coin listings for why listing spreads often cannot be captured.
Every fee
| Fee | How it is charged | What to watch |
|---|---|---|
| Trading | A percentage of each trade on each exchange | A market order pays the taker rate, usually higher than the maker rate |
| Withdrawal | Usually a fixed amount of the coin | Depends on the coin and network, and eats the spread on small sizes |
| Network | At many exchanges, included in the withdrawal fee | Depends on network congestion |
| Slippage | The gap between the book price and your average fill | Grows with size, shrinks with depth |
You can price a trade in advance on the Spot-Spot tab of the spread calculator. It takes prices, the number of coins and trading fees. Add the withdrawal fee, network fee and slippage yourself.
Transfer time and price risk
A transfer has three stages: exchange A processes the withdrawal, the network confirms the transaction, and exchange B credits the deposit after its own number of confirmations. On Bitcoin a new block arrives about every 10 minutes on average, and exchanges set different confirmation requirements: one, three or six, for example. Add manual withdrawal reviews, and a transfer can take anywhere from a few minutes to hours.
All that time the coin is in transit and you cannot sell it. The price on exchange B moves and the spread narrows, partly because other traders see the same gap. Ways to reduce the risk:
- choose a network that confirms quickly and that both exchanges support;
- start with sizes you can comfortably afford to lose part of;
- decide in advance what you will do if the spread disappears while the coin is in transit: sell straight away or wait;
- for frequent trades, move to the setup with balances on both exchanges.
Hedging with a futures short: an advanced technique
You can offset price risk during the transfer with futures. Right after buying the coin on exchange A's spot market, open a Short on a perpetual futures contract for the same number of coins. If the price falls during the transfer, the loss on the coin is offset by the gain on the short. Once the coin reaches exchange B, sell it and close the short.
The technique works, but it brings its own risks and costs:
- Fees. Opening and closing the short are two more trades with trading fees.
- Funding. A funding rate payment may fall within your holding time. Many exchanges settle it every 8 hours, but some contracts use shorter intervals. With a positive rate the short receives the payment; with a negative rate it pays.
- Basis. The futures price is not the spot price, and the gap between them (the basis) changes too. The hedge covers market moves, not that gap. How far futures trade from spot is visible in the Spot – Futures table.
- Liquidation. If the price spikes, the short goes into the red. With high leverage and little margin, the position can be liquidated before the coin reaches exchange B.
- Not every coin has futures. Small coins, where spreads are most common, may have no futures contract or only a thin book.
Worked example with illustrative numbers
All numbers are illustrative and only show the order of the calculation. The size is $2,000. On exchange A the best selling price (Ask) is $0.5000, on exchange B the best buying price (Bid) is $0.5125, a 2.5% spread. The taker fee is 0.1% on both exchanges, and the withdrawal fee is 10 coins.
| Step | Calculation | Result |
|---|---|---|
| Buy on exchange A | $2,000 at an average price of $0.5010 including slippage | 3,992.02 coins |
| Trading fee on A | 0.1%, or 3.99 coins | 3,988.02 coins |
| Withdraw to exchange B | minus 10 coins | 3,978.02 coins |
| Sell on exchange B | at an average price of $0.5110 including slippage | $2,032.77 |
| Trading fee on B | 0.1%, or $2.03 | $2,030.74 |
| Result | +$30.74, about 1.5% |
Of the 2.5% on screen, about 1.5% is left. Now suppose the price on exchange B falls 2% during the transfer and the average sell price becomes $0.50078. After the fee you receive $1,990.12, a loss of $9.88.
The same pair at a $300 size and the same prices gives about +$0.27: the fixed 10-coin withdrawal fee eats almost the whole spread. The smaller the size, the more the withdrawal fee weighs on the result.
Common mistakes
- Using the last price for the spread. The trade fills at the Ask and Bid, and on a meaningful size deeper in the book.
- Not checking withdrawals before buying. The coin is bought but cannot be withdrawn, so you either wait for it to reopen or sell it back.
- Trusting the ticker. The same name does not mean the same token: check the contract and network.
- Forgetting the withdrawal fee. A fixed fee on a small size turns a gain into a loss.
- Withdrawing on an unsupported network or without a memo. The funds get stuck, and getting them back depends on the exchange's support.
- Going in with your full size on an unfamiliar pair. Keep the first trade on a new exchange pair small to test the transfer route and crediting time.
- Holding large sums without account protection. Turn on two-factor authentication and a withdrawal address whitelist, as described in How to secure your crypto exchange account.
Further reading
Every column and filter of the table is described in the Spot – Spot table guide. The theory of spot arbitrage is in the course lessons Spot — Spot arbitrage basics and Spread, depth, volume. Key terms are in the glossary: spread, order book, maker and taker and slippage.
Questions and answers
What is cross-exchange crypto arbitrage in simple terms?
It is buying a coin on one exchange where it is cheaper and selling it on another where it is more expensive. The result is the price difference minus trading fees, the withdrawal fee and slippage.
Can you do crypto arbitrage between exchanges without transferring coins?
Yes. Keep a stablecoin on the buying exchange and the coin on the selling exchange in advance, and make both trades at almost the same time. A transfer is only needed later, when the balances have to be rebalanced.
Why is the spread large but impossible to capture?
Most often deposits or withdrawals are closed on one of the exchanges, the order book is thin, or different tokens trade under one ticker. Check D/W status, the contract and network, and compare Ask and Bid.
How much money do you need to start?
There is no single figure. Withdrawal fees are usually fixed, so on a small size they eat the spread. Price the trade with your own fees and start with an amount you are prepared to lose.
Should you hedge the transfer with futures?
Not necessarily. A short protects against a falling price while the coin is in transit, but adds fees, funding and liquidation risk. It is a technique for traders already comfortable with both spot and futures.